Manage Incoming Calls |
Manage Incoming Calls
You can use the call waiting feature to answer incoming calls when you are already engaged in a previous call.
If you cannot answer a call because your phone is faulty or the network signal is poor, you can also set call forwarding to forward calls to another number or device.
Try now
Drag right to answer the
call.
Drag left to reject the
call.
Touch to reject the call and reply with a message.
Touch to set a reminder for calling back.
Try now
When the phone is connected to a Bluetooth headset or plugged into a wired headset, use the headset to answer calls if your hands are occupied or it is difficult to swipe the screen (supports voice calls only).
Enable this feature: Go to Phone, tap ,enable Automatically answer calls and set Auto-answer delay time duration.
Try now
The Call waiting feature lets you answer an incoming call when a call is already in progress by placing the first call on hold. This feature requires the support of your carrier. For details, contact your carrier.
Go to
and then go to .If your phone has two SIM cards installed, configure the settings for SIM 1 and SIM 2 respectively.
This feature may vary depending on your carrier.
Try now
Try now
After the Call forwarding feature is enabled, calls that meet your pre-set conditions will be automatically transferred to a specified phone number. This feature requires the support of your carrier. For details, contact your carrier.
Open Phone, go to , and touch Call forwarding.
Select and enable a forwarding method, then enter and confirm the target number.
If your phone has two SIM cards installed, configure the settings for SIM 1 and SIM 2 respectively.
This feature may vary depending on your carrier.
Try now
Open Phone, go to , and touch Call forwarding.
Select the forwarding mode and disable it.
Try now
Enable the online number identification feature to identify the source of unknown calls (such as delivery and harassing calls) based on real time analysis of an online database.
Go to Online Number Identification.
and enableTry now